Differences

This shows you the differences between two versions of the page.

--- b_manual:b2 [09/12/2024 16:12] – created - external edit 127.0.0.1
+++ b_manual:b2 [Unknown date] (current) – external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
+{{ :header.png?nolink&600 |}}
+=====B-2 Backing of Apparatus=====
+===Non-Emergency Manual===
+==Date Revised: 02/01/2018==
+<sub>Last Modified: ~~LASTMOD~~ </sub>
+[[https://www.tfrdweb.com/dokuwiki/doku.php?id=b_manual:b2&do=export_pdf|Export B2 to PDF]] \\
+[[https://www.tfrdweb.com/dokuwiki/doku.php?id=b_manual&do=export_pdfns&book_ns=b_manual&book_title=B Manual|Export -Entire B Manual- to PDF]]
+----
+**Purpose**
+To ensure the safety of TFRD personnel while backing apparatus and accident prevention.
+----
+**Policy/Procedure**
+**1.**	All fire personnel excluding the driver, on any TFRD apparatus shall exit the vehicle and ALL personnel shall assist in backing any and all apparatus into the desired location.
+**2.**	The driver is ultimately responsible for the safe operations of the apparatus AT ALL TIMES!
+**3.**	If driver loses sight of the backer, they shall immediately stop apparatus until they once again gain sight of their backer!
+**4.**	Plymovent person is NOT a backer unless apparatus has only 2 persons assigned. If the plymovent person is to be utilized as a backer, the following procedure shall be followed:
+  *The Plymovent person shall guide apparatus to doorway of bay and driver shall stop rig completely.
+  *The Plymovent shall be attached to apparatus, and then plymovent person shall move into position where he/she is clearly visible to the driver.
+  *The Plymovent person will then guide apparatus slowly and safely into bay.
+**5.**	Reflective vests shall be utilized by all fire personnel when backing on public streets and or highways.
+**6.**	Portable radios shall be utilized in case contact needs to be made with the driver or an emergency stop is needed. The portable microphone shall be carried in a state of readiness, and all members must be on the same channel.
+<- b_manual:b1 ^ b_manual:start|Index ^ b_manual:b3 ->